Essay on Outcomes of Gaining and Losing Faith - 900 Words

Everyones future depends on their self-belief and how positively they look at the events that occur in their life. This is portrayed through Suzanne Buffam’s â€Å"Trying† and Alix Ohlin’s novel Inside. The speaker and Anne both face inner conflicts; the speaker gains faith in herself which helps her overcome her conflict and have a peaceful state of mind, whereas Anne loses faith in herself which leads to her failure in overcoming her conflict and losing her confidence. The speaker’s reassuring tone shows her peace of mind contrary to which Anne’s melancholic tone which shows her low self-esteem. Furthermore, the speaker’s use of allusion shows her inner peace, which is the result of gaining faith in herself, whereas Anne’s use of diction†¦show more content†¦She has, â€Å"the feeling of knowing nothing this good could last, of getting away with it now, for as long as she could. Let’s hope† (Ohlin 209). This pr oves that Anne’s inner conflict is that she hopes for her relationship with Diane to last, but does not believe that will happen. After losing faith in herself, she thinks she does not have the ability to maintain a relationship. She even says, â€Å"Other people were destined to keep leaving, over and over again† (Ohlin 229). She is saying that she will always have to abandon the people she loves. She does not understand that if she wants to be with Diane, she needs to have faith in herself. Instead, she keeps thinking the worst of herself and breaks up with Diane. Unlike the speaker who overcomes her conflict by gaining faith, Anne does not overcome her conflict as she loses her faith and ends up being pessimistic. The speaker’s reassuring tone reflects her peace of mind, which is the result of gaining faith in herself whereas Anne’s dejected tone portrays how she does not believe in herself which is the result of losing her faith. The speaker feels at peace because of her faith. She says, â€Å"try not to worry† (Buffam). She is reassuring herself which shows her faith and trying not to worry because she has started to believe that she will eventually get pregnant. She looks in the mirror and says, â€Å"The mirror, perhaps mercifully, was dusty, and I did not get a good look†Show MoreRelatedIntegrative Counseling : Christian Based Counseling1102 Words   |  5 Pagesdesign of man. While we may not know the whole design ourselves but we can use our limited knowledge together with what we know of Gods intentions for man to understand why we do what we do. In the end while some may see integration as selling out or losing the point of the therapy it can still be hi ghly effective on both a religious front and a counseling front. The Differences The key difference between these two kinds of therapies is the techniques used is the methods used. As mentioned one ofRead MoreHistory and Understanding the Past1011 Words   |  4 Pagescondemned to repeat it’ . Basically, it gives us a frame of events to consider the possible outcomes of present and future actions. It helps us understand past triumphs and tragedies, and gives us the opportunity to succeed where others have failed. As Oscar Handlin quoted â€Å"the historian’s vocation depends on this minimal article of faith: truth is absolute; it is as absolute as the world is real. This faith may be philosophically naà ¯ve, may even be philosophically absurd in this skeptical and relativist-mindedRead MoreDecision Making And The Prospect Theory1490 Words   |  6 Pagesindividuals make decisions based on the weighted average of the utility. In other words, risk is treated objectively. However, Kahneman and Tversky (pp.35, 1992) proposed that decisions are no t always made objectively based on the probability of the outcome. They are affected by the decision weights such as ambiguity, which Expected Utility Theory does not take into account (Ellsberg, 1961). One good reason why people still purchase government securities is because of lack of information or ambiguityRead MoreThe Arguments For The Existence Of God940 Words   |  4 Pagesperson. In a way, there is no predetermined outcome: instead, the essence and purpose of each person are the summary of their own choices in life determining. 2. The crisis of meaning that John Stuart Mill has experienced is indeed a significant event which everyone is most likely to encounter at some point in their own lives. When all the purpose and meaning in the life of each individual have been proven wrong, that person is likely to experience losing the value of his or her life, unable to moveRead MoreThe Culture Of The Western Culture Essay1368 Words   |  6 Pagesadult is different from when he was a child. Unlike the days when he used to find comfort at home when the family spoke Spanish, he no longer sees any pride in speaking a language that only made him different from the rest of the people. Through gaining an education, he has a new way of looking at things. He considers not knowing how to speak proper English embarrassing and a drawback to achieving more in life. Contrary to this Castillo is keen on the preservation of one’s identity despite the acquisitionRead MoreOdysseus: A Hero Essay1074 Words   |  5 Pagest he fictional world, a hero is someone who has learned from his or hers journey to come out a changed person. Some characters complete the journey, while others do not quite make it to the end. In The Odyssey, Odysseus takes more than one leap of faith on his journey to become a hero by learning from his mistakes, making personal sacrifices, and becoming a better man. After making mistakes, Odysseus realizes his wrong doings and changes his actions for the better. Throughout the story, OdysseusRead MoreBrave New World Government1086 Words   |  5 Pagesamongst the citizens of the country. Earning respect can be achieved by conducting one s self honorably and proving one s capabilities. Huxley presents another technique of acquiring respect by employing â€Å"hypnopaedia† as means of earning respect and gaining control over the nation. Of course they don t. How can they? They don t know what it s like being anything else. We d mind, of course. But then we ve been differently conditioned. Besides, we start with a different heredity(Huxley,5). BraveRead MoreLegal Framework Of The Interaction Between Trusts And Relationship Property Essay1380 Words   |  6 Pagesbalance between trust and relationship property rights under the current law. Firstly the interaction between trusts and relationship property will be looked at in depth before goi ng on to consider what avenues are currently available for either gaining access to trust property or being compensated for being denied access (wording). The current position favours trust rights over relationship property rights. This is a concern because it creates the potential for injustice in relationship propertyRead MoreI Discovered One Perspective By Talking With Mrs. Bonnie Yost1452 Words   |  6 PagesAdulthood can be a time of distress or fulfillment. It will likely include deep feelings of loss and grief, and may also include a sense of hope and joy. Despair can come from the experience of loss, missed opportunities in the past, declining health, losing friends and family, and an ever-approaching unknown future. Hope and positivity are derived from a sense of purpose and meaningfulness (Berger, 2014, p. 733). How does someone in Late Adulthood successfully navigate this time of life? I discoveredRead MoreEssay on The Balance Between Positive and Negative Thinking1503 Words   |  7 PagesThinking†, a New York Times bestseller. His book outlines principles and techniques for gaining achievement, happiness, and health. Peal states that â€Å"these principles have worked so efficiently over so long a period of time that they are now firmly established as documented and demonstrated truth† (Peale xii). The proof that Peale’s techniques can work is seen in the lives of millions who put their faith in Peale’s teachings. They are experiencing energy like never before, peace of mind and improved

Exercise 8 Chemical and Physical Processes of Digestion Free Essays

Lab Report 8 April 15th Exercise 8: Chemical and Physical Processes of Digestion Lab Report Questions Activity 1 What is the difference between the IKI assay and Benedict’s assay? IKI assay detects the presence of starch, and the Benedict assay tests for the presence of reducing sugars as well as IKI turns blue black whereas Benedict is a bright blue that changes to green to orange to reddish brown with increasing levels of maltose What was the purpose of tubes #1 and #2? Why are they important? Because they are the controls and the controls must be prepared to provide a known standard against which all comparisons must be made. Positive controls all of the required substances are included and negative a negative result is expected validating the experiment. What effect did pH level have on the enzyme? It partially allowed the enzyme to do its job because there were positive signs of both starch and its reducing sugars. We will write a custom essay sample on Exercise 8: Chemical and Physical Processes of Digestion or any similar topic only for you Order Now What effect did boiling and freezing have on the activity of amylase? Boiling did not allow the breakdown of starch because the reduced sugars were not present and the starch was where the freezing showed a ++ for the reducing sugars and a negative result in the starch showing that it reduced the starch. Activity 2 What was the effect of the enzyme peptidase? Why? The enzyme peptidase could not break down the starch by showing that there is positive IKI test for starch and a negative Benedict test for its reduced sugars. What is cellulose? According to your results, does salivary amylase digest cellulose? Cellulose is a polysaccharide found in plants to provide rigidity to their cell walls and salivary amylase is not able to digest it because there were no positive signs of the Benedict test which should have been positive if a breakdown did occur. What happened to the cellulose in tube #6? It was digested by the bacteria showing a very positive sign for the Benedict test. Activity 3 What is the optimal pH level for pepsin? Why do you think that is? The optimal pH for pepsin is around 2. 0 because it showed a higher optimal density showing that more BPNA has been hydrolyzed. Also the stomach is very acidic adding to the reasoning that pepsin will work well in acidic environments. How was optical density measured? What is the significance of this measurement? A spectrometer shine light through the sample and then measures how much light is absorbed. The fraction of light absorbed is expressed as the sample of optical density. The higher the optical density is greater than zero the more hydrolysis has occurred. Activity 4 Why do lipids pose special problems for digestion? Because the insolubility of the triglycerides presents a challenge because they tend to clump together leaving surface molecules exposed to lipase enzymes. How do bile salts effect lipid digestion? Bile salts are secreted into the small intestine during digestion to physically emulsify lipids. They act as a detergent separating the lipid clumps and increase the surface area accessible to the lipase enzymes. What factors affect digestive enzymes? Some factors that affect digestive enzymes are pH and the amount of lipase and bile salts in a solution. How to cite Exercise 8: Chemical and Physical Processes of Digestion, Essays

Only Once In A Lifetime Will A New Invention Come About To Touch Every

Only once in a lifetime will a new invention come about to touch every aspect of our lives. Such a device that changes the way we work, live, and play is a special one, indeed. The Microprocessor has been around since 1971 years, but in the last few years it has changed the American calculators to video games and computers (Givone 1). Many microprocessors have been manufactured for all sorts of products; some have succeeded and some have not. This paper will discuss the evolution and history of the most prominent 16 and 32 bit microprocessors in the microcomputer and how they are similar to and different from each other. Because microprocessors are a subject that most people cannot relate to and do not know much about, this paragraph will introduce some of the terms that will be in- volved in the subsequent paragraphs. Throughout the paper the 16-bit and 32-bit mi- croprocessors are compared and contrasted. The number 16 in the 16-bit microproces- sor refers how many registers there are or how much storage is available for the mi- croprocessor (Aumiaux, 3). The microprocessor has a memory address such as A16, and at this address the specific commands to the microprocessor are stored in the memory of the computer (Aumiaux, 3). So with the 16-bit microprocessor there are 576 places to store data. With the 32-bit microprocessor there are twice as many places to store data making the microprocessor faster. Another common term which is mentioned frequently in the paper is the oscil- lator or the time at which the processors "clock" ticks. The oscillator is the pace maker for the microprocessor which tells what frequency the microprocessor can proc- ess information, this value is measured in Mega-hertz or MHz. A nanosecond is a measurement of time in a processor, or a billionth of a second. This is used to measure the time it takes for the computer to execute an instructions, other wise knows as a cy- cle. There are many different types of companies of which all have their own family of processors. Since the individual processors in the families were developed over a fairly long period of time, it is hard to distinguish which processors were introduced in order. This paper will mention the families of processors in no particular order. The first microprocessor that will be discussed is the family of microprocessors called the 9900 series manufactured by Texas Instruments during the mid-70s and was developed from the architecture of the 900 minicomputer series (Titus, 178). There were five dif- ferent actual microprocessors that were designed in this family, they were the TMS9900, TMS9980A, TMS9981, TMS9985, and the TMS9940. The TMS9900 was the first of these microprocessors so the next four of the microprocessors where simply variations of the TMS9900 (Titus, 178). The 9900 series microprocessors runs with 64K memory and besides the fact that the 9900 is a 16-bit microprocessor, only 15 of the address memory circuits are in use (Titus, 179). The 16th address is used for the computer to distinguish between word and data functions (Titus, 179. The 9900 series microprocessors runs from 300 nanoseconds to 500 ns from 2MHz to 3.3MHz and even some variations of the original microprocessor where made to go up to 4MHz (Avtar, 115). The next microprocessor that will be discussed is the LSI-11 which was pro- duced from the structural plans of the PDP-11 minicomputer family. There are three microprocessors in the LSI-11 family they are the LSI-11, LSI-11/2, and the much im- proved over the others is the LSI-11/32 (Titus, 131). The big difference between the LSI-11 family of microprocessors and other similar microprocessors of its kind is they have the instruction codes of a microcomputer but since the LSI-11 microprocessor originated from the PDP-11 family it is a multi-microprocessor (Avtar, 207). The fact that the LSI-11 microprocessor is a multi-microprocessor means that many other mi- croprocessors are used in conjunction with the LSI-11 to function properly (Avtar, 207). The LSI-11 microprocessor has a direct processing speed of 16-bit word and 7- bit data, however the improved LSI-11/22 can directly process 64-bit data (Titus, 131). The average time that the LSI-11 and LSI-11/2 process at are 380 nanoseconds, while the LSI-11/23 is clocked at 300 nanoseconds (Titus, 132). There are some great strengths that lie in the LSI-11 family, some of which are the efficient way at which the microprocessor processes and the ability to run minicomputer software which leads to great hardware support (Avtar, 179). Although there are many strengths to the Only Once In A Lifetime Will A New Invention Come About To Touch Every Only once in a lifetime will a new invention come about to touch every aspect of our lives. Such a device that changes the way we work, live, and play is a special one, indeed. A machine that has done all this and more now exists in nearly every business in the U.S. and one out of every two households. This incredible invention is the computer. The electronic computer has been around for over a half-century, but its ancestors have been around for 2000 years. However, only in the last 40 years has it changed the American society. From the first wooden abacus to the latest high-speed microprocessor, the computer has changed nearly every aspect of people's lives for the better. The very earliest existence of the modern day computer's ancestor is the abacus. These date back to almost 2000 years ago. It is simply a wooden rack holding parallel wires on which beads are strung. When these beads are moved along the wire according to "programming" rules that the user must memorize, all ordina ry arithmetic operations can be performed. The next innovation in computers took place in 1694 when Blaise Pascal invented the first digital calculating machine. It could only add numbers and they had to be entered by turning dials. It was designed to help Pascal's father who was a tax collector. In the early 1800's, a mathematics professor named Charles Babbage designed an automatic calculation machine. It was steam powered and could store up to 1000 50-digit numbers. Built in to his machine were operations that included everything a modern general-purpose computer would need. It was programmed by--and stored data on--cards with holes punched in them, appropriately called punchcards. His inventions were failures for the most part because of the lack of precision machining techniques used at the time and the lack of demand for such a device. After Babbage, people began to lose interest in computers. However, between 1850 and 1900 there were great advances in mathematics and physics that began to rekindle the interest. Many of these new advances involved complex calculations and formulas that were very time consuming for human calculation. The first major use for a computer in the U.S. was during the 1890 census. Two men, Herman Hollerith and James Powers, developed a new punched-card system that could automatically read information on cards without human intervention. Since the population of the U.S. was increasing so fast, the computer was an essential tool in tabulating the totals. These advantages were noted by commercial industries and soon led to the development of improved punch-card business-machine systems by International Business Machines (IBM), Remington-Rand, Burroughs, and other corporations. By modern standards the punched-card machines were slow, typically processing from 50 to 250 cards per minute, with each card holding up to 80 digits. At the time, however, punched cards were an enormous step forward; they provided a means of input, output, a nd memory storage on a massive scale. For more than 50 years following their first use, punched-card machines did the bulk of the world's business computing and a good portion of the computing work in science. By the late 1930s punched-card machine techniques had become so well established and reliable that Howard Hathaway Aiken, in collaboration with engineers at IBM, undertook construction of a large automatic digital computer based on standard IBM electromechanical parts. Aiken's machine, called the Harvard Mark I, handled 23-digit numbers and could perform all four arithmetic operations. Also, it had special built-in programs to handle logarithms and trigonometric functions. The Mark I was controlled from prepunched paper tape. Output was by cardpunch and electric typewriter. It was slow, requiring 3 to 5 seconds for a multiplication, but it was fully automatic and could complete long computations without human intervention. The outbreak of World War II produced a desperate need for computing capability, especially for the military. New weapons systems were produced which needed trajectory tables and other essential data. In 1942, John P. Eckert, John W. Mauchley, and their associates at the University of Pennsylvania decided to build a high-speed electronic computer to do the job. This machine became known as ENIAC, for "Electrical Numerical Integrator And Calculator". It could multiply two Only Once In A Lifetime Will A New Invention Come About To Touch Every Only once in a lifetime will a new invention come about to touch every aspect of our lives. Such a device that changes the way we work, live, and play is a special one, indeed. The Microprocessor has been around since 1971 years, but in the last few years it has changed the American calculators to video games and computers (Givone 1). Many microprocessors have been manufactured for all sorts of products; some have succeeded and some have not. This paper will discuss the evolution and history of the most prominent 16 and 32 bit microprocessors in the microcomputer and how they are similar to and different from each other. Because microprocessors are a subject that most people cannot relate to and do not know much about, this paragraph will introduce some of the terms that will be in- volved in the subsequent paragraphs. Throughout the paper the 16-bit and 32-bit mi- croprocessors are compared and contrasted. The number 16 in the 16-bit microproces- sor refers how many registers there are or how much storage is available for the mi- croprocessor (Aumiaux, 3). The microprocessor has a memory address such as A16, and at this address the specific commands to the microprocessor are stored in the memory of the computer (Aumiaux, 3). So with the 16-bit microprocessor there are 576 places to store data. With the 32-bit microprocessor there are twice as many places to store data making the microprocessor faster. Another common term which is mentioned frequently in the paper is the oscil- lator or the time at which the processors ?clock? ticks. The oscillator is the pace maker for the microprocessor which tells what frequency the microprocessor can proc- ess information, this value is measured in Mega-hertz or MHz. A nanosecond is a measurement of time in a processor, or a billionth of a second. This is used to measure the time it takes for the computer to execute an instructions, other wise knows as a cy- cle. There are many different types of companies of which all hav e their own family of processors. Since the individual processors in the families were developed over a fairly long period of time, it is hard to distinguish which processors were introduced in order. This paper will mention the families of processors in no particular order. The first microprocessor that will be discussed is the family of microprocessors called the 9900 series manufactured by Texas Instruments during the mid-70s and was developed from the architecture of the 900 minicomputer series (Titus, 178). There were five dif- ferent actual microprocessors that were designed in this family, they were the TMS9900, TMS9980A, TMS9981, TMS9985, and the TMS9940. The TMS9900 was the first of these microprocessors so the next four of the microprocessors where simply variations of the TMS9900 (Titus, 178). The 9900 series microprocessors runs with 64K memory and besides the fact that the 9900 is a 16-bit microprocessor, only 15 of the address memory circuits are in use (Titus, 179). T he 16th address is used for the computer to distinguish between word and data functions (Titus, 179. The 9900 series microprocessors runs from 300 nanoseconds to 500 ns from 2MHz to 3.3MHz and even some variations of the original microprocessor where made to go up to 4MHz (Avtar, 115). The next microprocessor that will be discussed is the LSI-11 which was pro- duced from the structural plans of the PDP-11 minicomputer family. There are three microprocessors in the LSI-11 family they are the LSI-11, LSI-11/2, and the much im- proved over the others is the LSI-11/32 (Titus, 131). The big difference between the LSI-11 family of microprocessors and other similar microprocessors of its kind is they have the instruction codes of a microcomputer but since the LSI-11 microprocessor originated from the PDP-11 family it is a multi-microprocessor (Avtar, 207). The fact that the LSI-11 microprocessor is a multi-microprocessor means that many other mi- croprocessors are used in conjunction with the LSI-11 to function properly (Avtar, 207). The LSI-11 microprocessor has a direct processing speed of 16-bit word and 7- bit data, however the improved LSI-11/22 can directly process 64-bit data (Titus, 131). The average time that the LSI-11 and LSI-11/2 process at are

ECE Lab Report essays

ECE Lab Report essays In this experiment, we constructed a circuit that was connected to a 7-panel writing board. The 6 inputs from the circuit were hooked up to the corresponding pins on the XS40 FPGA board. Then 6 outputs from the corresponding pins on the XS40 FPGA board were then connected to a ribbon cable that was connected to a computer. When the circuit was complete, we wrote a program in C++ to interface the hardware with the PC using its parallel-I/O port. The program was then improved to implement a calculator interface and performed mathematical operations. There were 15 different combinations on writing panel, which corresponded to 10 different digits, 4 different operands, and an equal sign. Writing panel: it is consisted of 7 metallic panels. Each panel is soldered to a wire, which is connected to the D-latch. The writing panel is used for the user to input the combination of the corresponding number, operand, and equal sign. 7474 D-latch: four chips were used during this lab because we need 7 inputs (Preset). Each panel from the writing board is connected to the PRE on the D-latch to set the state, 1 being used and 0 being unused. Three of four D-latches CLRs were all connected to together in order to clear the writing panel when it is grounded; moreover, all CPs and Ds were grounded. XS40 FPGA board: it used to run VHDL program I/O Port: Port A is connected to the 6 outputs from the XS40 FPGA board, D-latch from the 4th D-latch chip, and the last used PIN being grounded. Port B is connected to the common RESET. I/O port is then attached by a ribbon cable from the computer. This configuration is simply to send inputs to the computer, where a calculator program is implemented. Once a digit, an operand, or an equal sign has been entered, it is sent to the computer and then the computer will automatically clear the writing panel through Port B to RESET. Circuit Diagram and Block Diagram ...

Citing a Chapter from an Edited Book in Oxford Referencing

Citing a Chapter from an Edited Book in Oxford Referencing Citing a Chapter from an Edited Book in Oxford Referencing When academics contribute a single chapter to a larger volume, you may find yourself needing to cite just part of a book. And while this is like citing a full book, it does differ in a few ways. Let’s look, then, at how to cite a chapter from an edited book with Oxford referencing. In-Text Citations for a Chapter from an Edited Book All versions of Oxford referencing use a footnote and bibliography system. As such, we indicate citations with superscript numbers in the main text: Citations usually appear after final punctuation in a sentence.1 In the accompanying footnote, you then need to give the following information for the chapter of the book you are citing: n. Chapter Author’s Initial(s) and Surname, â€Å"Chapter Title,† in Editor’s Initial(s) and Surname (ed.), Book Title, place of publication, publisher, year, page number(s). In practice, then, a footnote citation for a chapter from an edited book would look something like this: 1. M. L. Rosenzweig, â€Å"Do Animals Choose Habitats?,† in M. Berkoff and D. Jamieson (eds.), Readings in Animal Cognition, Cambridge, Bradford Books, 1999, p. 189. The page numbers here should indicate the specific section you’re citing. You will then give the complete page range for the chapter in your bibliography. For repeat references to a single chapter from a book, meanwhile, you can use a shorter citation format. This usually involves either: Giving just the author’s surname and a new page number. Using the Latin abbreviations â€Å"ibid.,† â€Å"op. cit.,† and â€Å"loc. cit.† Check your style guide for more information on which approach to use. Chapters from Edited Books in an Oxford Bibliography In your bibliography, you should list all cited sources alphabetically by author surname with full publication information. For a chapter from an edited book, this includes: Author Surname, Initial(s)., â€Å"Chapter Title,† in Editor’s Initial(s) and Surname (ed.), Book Title, place of publication, publisher, year, complete page range. As you can see, this is similar to the first footnote citation format. The key differences in the bibliography are that you give: The author’s surname first, followed by initials The page range for the entire chapter, not a pinpoint citation In practice, then, we would list the chapter cited above as follows: Rosenzweig, M. L., â€Å"Do Animals Choose Habitats?,† in M. Berkoff and D. Jamieson (eds.), Readings in Animal Cognition, Cambridge, Bradford Books, 1999, pp. 185–199. A Note on Oxford Referencing This guide sets out the basics of how to cite a chapter from an edited book using Oxford referencing. However, this system can differ between institutions. As such, you should always check your style guide for advice on how to present references in written work for your course. If you don’t have a style guide available or it doesn’t cover a certain issue, just aim for clarity and consistency. And if you need anyone to check the referencing in a document, we’re happy to help.

Essay assignment Example | Topics and Well Written Essays - 500 words - 3

Assignment - Essay Example However, these programs cannot eliminate food insecurity completely. This work represents the project, including the number of strategies, which will help to reduce the rate of food insecurity in the USA. The first measure, which must be included in the program, is an annual monitoring of the state of food security. The forecast of socio-economic development of the country should contain the current and medium-term balance of production and the consumption of basic foodstuffs. This step will give the government an opportunity to predict the gabs in the process of development of the food market and take steps for their elimination. The second measure includes the introduction of the analysis of price and food proportions into the practice of the government in order to increase the volume of agricultural products, raise the investment attractiveness of the industry, ensure its financial sustainability and profitability. An important problem of food security remains the quality of food. The poor areas of the USA are often imported with the products, which are of low quality and do harm to human health. Considering this issue, it is necessary to organize a system of quality control of the imported products for the whole technological chain. The particular attention should be paid to the turnover of raw materials and food products with the high level of genetically modified sources. It is necessary to introduce the measures for stimulation and certification of eco products. At the state level, the government should actively promote healthy nutrition policy. The next measure concerns the building of a strong nutrition safety net. Even those people, who have a good level of income, can face financial troubles, caused by seasonal unprofitability, family conditions and so forth. In this case, it is important for them to be supported by the state authorities by means of the available access to the USDA’s assistance

Black people Income Research Paper Example | Topics and Well Written Essays - 2500 words

Black people Income - Research Paper Example Also, wealth is critical in enabling families to weather emergencies and move along a path of long-term financial opportunity and security. As such, extreme wealth inequality especially between races implies that a disadvantaged race will be unable to benefit from opportunities associated with wealth and this will hamper the community’s economic growth and that of the nation as a whole (Institute on Assets and Social Policy 1). Statistics by government agencies and non-government agencies show that there is a huge wealth inequality between black people compared to the white people in the United States. This research paper will discuss this inequality and why this inequality exists and what are the possible ways of closing the racial income gap. Statistics on Racial Income Inequality The black people in the United States continue to earn far less income compared to the white people. According to the statistics released by the United States Census Bureau, per-capita income of th e black people in 2008 was $18,054, which was just 57.9 percent that of the white people which stood at $28,502. While this was a slight improvement over the 56.4 percent reported in 2007, it was down the 2005 statistics which as 59.3 percent (Christie para 1). The United States Bureau of Labor Statistics also indicate that the white people earn a median of $756 per week, which is 25 percent more compared to the black people who earn $607 weekly. In 2011, available data indicate that the median income for the black households was approximately $32,000. This amount was 61.7 percent of the median income of white households in the same year. What is more worrying is the fact that this was about the same percentage in 1970 which stood at 60.9 percent. This implies that there has been virtually no change in regard to income between the whites and the backs (Institute on Assets and Social Policy 5). This lack of notable change comes as a surprise considering that there have been visible i ndicators about the improvement of black people income situation. Factors or Causes of the Income Inequality between the Black People and White People Numerous studies have found out that there are a significant number of causes or factors contributing to low income among the blacks compared to the whites. It has been found out there are contemporary and historical causes that have resulted to this situation (Barsky, Bound, Charles and Lupton 663). The situation of income disparity is further compounded by the fact there us a very unequal income distribution among black households; it is even more unequal compared to the income distribution among white households. It should be noted that there some black people who earn pretty high income, even higher income than some of the top white households. This can be attributed to the benefits they have obtained in the recent years (Oliver and Shapiro 78). However, extremely large black population segment earn very low incomes. The weakening of labor unions and the long-term minimum wage reduction are some of the factors that have harmed the income of many black people. Other factors such as mass incarceration of black men, as well as the consequent exclusion from mainstream economy have significantly hampered black